The microstructures of high-Si Al alloy cylindrical simples produced by rheological squeeze-casting with bottom-up filling were investigated. The effect of process parameters on the distribution of hard phases (primary Si and Fe-rich phase) was evaluated, and flow characteristics of semi-solid slurry of high-Si Al alloy were investigated. Differences in volume fractions (VFs) of hard phases between the middle and upper layers of cylindrical samples decreased as the squeezing speed increased. Moreover, the flow state of the semi-solid alloy slurry transitioned from laminar to turbulent flow as the squeezing speed was increased. Movement of gases throughout the semi-solid alloy slurry filling process was analysed under different process parameters. The results provide insights for improving rheological casting of high-Si Al alloy and other Al matrix composites.

Three different compositions of high-Si Al alloy pipe, with a gradient structure, were produced through semi-solid rheological squeeze casting, the microstructural characteristics of which were investigated. The mechanism of gradient structure formation and the effect of acicular Fe-rich phases on liquid segregation were revealed. Meanwhile, the crystal structures of the Al4FeSi2 and Al15(Fe, Mn)3Si2 phase were elucidated. The relationship between the volume fraction of hard particles in the pipe wall and the macro-hardness was established. Wear resistance tests of the inner surfaces of the pipe walls, and tensile strength tests at different positions around the pipe walls, showed that the δ-Al4FeSi2 phase (acicular Fe-rich phases) reduced the wear resistance and the tensile strength of the alloy. In this study, the gradient distribution of the hard particles caused the outside of the pipe wall to have a higher tensile strength.

The effect of cooling slope (CS) on the microstructure of hypereutectic Al-22Si-2Fe (% w/w) alloys with 0%, 0.99%, and 1.36% Mn were studied. The results showed that primary Si particles (PSPs), needle-like Fe phases, coarse fishbone-shaped α-Al15(Fe, Mn)3Si2 phases, and eutectic Si could be refined. With such a CS process, the intermetallic compounds in the alloys with different Mn/Fe ratios were examined with an optical microscope, scanning electron microscope, and X-ray diffraction. Moreover, the acicular δ-Al4(Fe, Mn)Si2 and blocky α-Al15(Fe, Mn)3Si2 phases were analyzed by transmission electron microscopy.